Bluestone Hatchery™
Field-Tested Review
Six Cheap Incubators Later… I Finally Switched to the CT-180
Plug and Play. Set it… and finally stop babysitting your incubator.
Are you tired of constantly checking temperature and humidity like your incubator depends on you every five minutes? I know I was.
Before switching to the CT-series, I made the mistake a lot of people make—I bought several lower-end incubators thinking I was saving money. In reality, I wasn’t saving anything. I ended up investing in six lower-end incubators, and every one of them created more work than they saved.
Most didn’t come with rollers—you had to buy those separately. Even after getting everything set up, temperatures were never truly stable. I kept several temperature gauges inside because the actual temperature rarely matched the set temperature. That alone caused stress every time I set eggs.
It’s frustrating to spend $150 or more on an incubator, then turn around and spend even more money on extra gauges just to double-check whether your machine is telling the truth.
At one point, managing those cheaper incubators started feeling like a second full-time job. I found myself jumping up out of my chair saying,
“Hold on—the incubator needs me!”
My family got a good laugh out of that… but it stopped being funny to me.
When I finally decided to try the Hatching Time CT-180, I noticed the difference right away.
First thing I appreciated—everything came with it.
No chasing accessories. No guessing what else I needed to buy. No frustration trying to make pieces work together.
Setup was simple and straightforward.
Plug it in. Add water. Set your values. Done.
That’s when I realized what people really mean when they say “automatic incubator.”
The temperature and humidity control worked the way it should—from the start. No constant adjusting. No hovering over it every few hours. No wondering if the readings were actually accurate.
For the first time in a long time, incubation felt manageable again.
Less Stress, More Confidence
One of the biggest benefits I noticed after switching to the CT-series was peace of mind.
Instead of constantly worrying about temperature swings or humidity problems, I could trust the machine to do what it was designed to do.
That meant:
✔ Less daily stress
✔ Fewer adjustments
✔ More stable incubation conditions
✔ More confidence in every hatch
✔ Less time babysitting equipment
And honestly, that last one matters more than people realize.
When you’re running hatches—or even just trying to enjoy the experience—constant monitoring wears you down.
With the CT-180, I wasn’t jumping up every few minutes anymore yelling,
“The incubator needs me!”
Most of the time… it didn’t.
If you’re just starting out and thinking about buying your first incubator, or if you’ve already struggled with cheaper models, this is something worth considering.
Especially if:
• You’re tired of temperature swings
• You don’t trust your current readings
• You’re constantly adjusting humidity
• You feel like incubation has become stressful instead of enjoyable
Automation makes a difference—and once you experience it, it’s hard to go back.
Looking back, I wish I had started with an automatic system like the CT-60 or CT-180 instead of spending money on several cheaper units first.
What I thought was saving money actually cost me more—in time, frustration, and extra equipment.
Switching to the CT-180 didn’t just improve my setup—it reduced stress and simplified my daily routine.
And that alone made it worth it.
If you’re tired of babysitting your incubator and ready for something more reliable, going automatic might be the best upgrade you make.